Inflatable Floating Balloon Rubber Marine Airbag

• After-sales Service: 24 Hours Online
• Warranty: 12 Hours Online
• Standard: ISO 14409
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: JRB2024071102
• Application: Ship Launching And Ashoring
• Customized: Customized
• Condition: New
• Material: Rubber
• Certificate: ISO Bc CCS
• Accessories: Including
• Diameter: 1.5m
• Length: 20m
• Transport Package: Deflate Nude Packing
• Specification: customize
• Trademark: Jerryborg
• Origin: Qingdao, China
• Package Size: 1500.00cm * 120.00cm * 120.00cm
• Package Gross Weight: 800.000kg

Product Description

Detailed Photos

Marine Airbag for ship launching have the best designed structure which consists of three different functional membranes in rubber
layers.

1) Outer Rubber Layer
The outer rubber layer that covers the outside of marine airbag to protect under layers from abrasion and other external forces.
This compound has sufficient tensile and tearing strength to withstand any condition and hard usage.
2) Inner Rubber Layer
The inner rubber layer seals pressurized air inside marine airbags.
3) Synthetic-Tire-Cord Layer as Reinforcement
The reinforcement cord layers, which are made of synthetic-tire-cord commonly used in tires, are arranged at ideal angles to hold
the internal pressure and distribute stress evenly. So they can provide strong efficient reinforcement.

Product Description

2.special attention when use airbags
1) Strictly control the use of pressure
2) Surface contact with the air bag cannot have sharply pointed a blur, prevent prick the airbag
3) Try to avoid air bag length direction of distortion
4) Long time not to use or repaired airbag, pressure test is required before using again; Often use airbags,test once a year.
5) Drag the airbag on the ground balloon is prohibited

Product Parameters

3. Performance Calculation Principle of Airbags
The approximate bearing capacity can be calculated as follows:
F=PS
S=π x (D1-D2)/2
Mark:
F: Bearing capacity
P: Inner pressure
S: Contact area
D1: Diameter of airbags when free of loat
D2: Working height of airbags when loaded

Installation Instructions

Working pressure:

Type	D=0.8m	D=1.0m	D=1.2m	D=1.5m	D=1.8m	D=2.0m
3 layers	0.13MPa	0.10MPa	0.09MPa	0.07MPa	0.06MPa	0.05MPa
4 layers	0.17MPa	0.13MPa	0.11MPa	0.09MPa	0.08MPa	0.07MPa
5 layers	0.21MPa	0.17MPa	0.14MPa	0.11MPa	0.09MPa	0.08MPa
6 layers	0.25MPa	0.20MPa	0.17MPa	0.13MPa	0.11MPa	0.10MP

Application

Accessories Details